About This Item
Description
Jet Lube KILN GREASE 75129 Extreme-Service Aluminum-Complex Grease with PTFE 400 Lb. 50 Gal. Drum
- Extremely resistant to heat & oxidation
- Superior water resistance
- Excellent shear stability - will not run or pound out
- Resists wear
- Smooth texture
- Dropping Point >500Deg F (260Deg C)
- Protects against high loads, shock, welding and scoring
- Extends maintenance intervals
- Color Green
A premium lubricant formulated using a high viscosity, severely refined base oil. The base fluid combined with aluminum complex thickener produces a grease with exceptional high temperature, water resistance, and high load characteristics. The grease is ideal for use in kiln bearings, steel mills, pulp and paper mills, or in any severe service application where temperature, water washout and contamination, extreme loads, or a combination of these factors are present.
- Thickener Aluminum Complex
- Fluid Type Lubricating
- Color/Appearance Green
- Dropping Point (ASTM D-566) 542Deg F (283Deg C)
- Specific Gravity 0.94
- Density (lb/gal) 7.80
- Additive Type Solids, including PTFE
- Flash Point (ASTM D-92), typ. >560Deg F (293Deg C)
- Autoignition Point (CALCULATED) >615Deg F (324Deg C)
- NLGI Grade 2
- Penetration @77Deg F (ASTM D-217) 265 - 295
- Copper Strip Corrosion 1A
- (ASTM D-4048)
- 4-Ball (ASTM D-2596)
- Weld Point, kgf 500
- Load Wear Index 80
- Wear Scar Diameter (ASTM D-2266) 0.6
- Oxidation Resistance (ASTM D-942)
- PSI Drop, 200 hours <5.0
- Base Oil Viscosity (ASTM D-445)
- cSt @ 40Deg C ISO 460
- Service Rating 0Deg F (-18Deg C) to
- 500Deg F (260Deg C)
Product Features
Extended Information
Technical Specs
Prop 65 Warning: Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
