About This Item
Description
24" x 24" chrome shelf for seismic shelving.
- No labor-intensive sway braces are required on ends or rear,
- allowing complete access to shelves and stored items.
- Seismic stability and strength enhanced by 2 gauge top wire
- on each end.
- Tapered aluminum split sleeves create a positive lock that
- becomes stronger as the load increases. Zinc-plated locking
- ring is included.
- Square heavy-duty foot plates, provided with posts, are
- adjustable to help compensate for uneven floor surfaces.
- Patented QuadTruss design (patent #5,390,803) makes
- shelves up to 25% stronger and provides a retaining ledge
- for increased storage stability and product retention.
- Shelf utilizes a pincer-type design with the mat wire
- sandwiched between the two top truss wires, adding
- significant strength and distributing the entire load without
- stress and strain on the welds.
- Numerically calibrated grooved posts, tapered aluminum
- split sleeves and shelf collars combine to make shelving
- assembly a simple two-step exercise:
- - 1) Snap the split sleeves onto a post over the number of
- your choice;
- - 2) Slide a shelf collar over the split sleeves.
- A positive lock between shelf and post is created without
- the use of any tools.
- Open-wire construction promotes higher visibility, allows
- light to pass through the shelves, permits greater air
- circulation which helps reduce moisture and dust build-up,
- and increases the effectiveness of fire-suppression systems.
- Posts are numbered in increments of 1" (25mm) to ensure
- fast and level assembly. Foot casting and posts are pierced.
- Packaging: 24" through 48" (610 through 1219mm) lengths
- are packed four to a box. 54" and 60" (1372 and 1829mm)
- lengths are packed two to a box.
Product Features
Extended Information
Technical Specs
Prop 65 Warning: Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
