Security Seals

Privacy Seals

Business Seals

Certified Seal

Online Payments

Official PayPal Seal



You Are Here: Home > Tools & Hardware > Hand Tools
We found 918 results matching your criteria.
Refine by Category:
Drywall and Plastering Tools Files
Hammers and Striking Tools Inspection and Retrieving Tools
Magnifiers Marking Tools
Measuring and Layout Tools Pliers
Pullers and Seperators Punches, Chisels, and Hand Drills
Rakes and Shovels Screwdrivers and Nutdrivers
Sockets Specialty Safety Tools
Staplers, Tackers, and Accessories Tool Kits
Wrenches
Sort By:
Page of 92
Gerber 30-000184 DMF Knife, Modified Clip Point, Serrated Edge
Gerber 30-000184 DMF Knife, Modified Clip Point, Serrated Edge
Gerber 30-000184 DMF - Modified Clip Point, Fine Edge - Box Series: DMF
D.M.F., or Dual Multi Function, is an automatic knife that springs into action with either the right or left hand. While using gloves, this robust knife can be carried and deployed in either strong or weak hand. The fully automatic S30V steel blade boasts superior edge retention and corrosion resistance. The G10 handle offers a mix of strength and low weight. Ambidextrous deployment. The pommel is designed with a strike point for emergency egress. The large lanyard hole fits cord or webbing. Proudly made in U.S.A.
Arrow Fastener 405 5/16" Flat crown Staples, 1000/Pk
Arrow Fastener 405 5/16" Flat crown Staples, 1000/Pk
Arrow Fastener 405 5/16" (8mm) Flat crown Staples, 1000/Pk
Kastar 1015A Oxygen Sensor / Vacuum Switch Socket
Kastar 1015A Oxygen Sensor / Vacuum Switch Socket
Multi-purpose socket used for removal and replacement of oxygen sensors and vacuum switches; and PVS, TVS valve sockets as found on Ford, General Motors, Chrysler, and some imported vehicles.
   Withstands up to 125 ft./lbs. torque.

Use with 3/8" square drive or 7/8" wrench.
Kastar 469 Rocker Arm Adjustment Tool for Harley-Davidson Springer Motorcycles
Kastar 469 Rocker Arm Adjustment Tool for Harley-Davidson Springer Motorcycles
Used to adjust the rocker arms on Springer forks on Harley-Davidson motorcycles.
   Enables technicians to perform rocker adjustment procedures quickly, safely and accurately.
   Simple, one-person operation using a 1/2" square drive torque wrench and a 3/8" breaker bar or ratchet.
   Combination of 1-1/2" 12 point hex with 1/2" hex key allows guided alignment for ease of adjustment of rocker arms.
   1/2" square drive accommodates the use of a 1/2" drive torque wrench for precise tightening of fastener
Kastar 5429 20-Pc. 5/16" Extra Long Bit Wrench Set
Kastar 5429 20-Pc. 5/16" Extra Long Bit Wrench Set
Used in conjunction with multiple bits for general purpose applications. Wrench set is especially useful to remove/install automotive door hinges.

   Extended handle allows access to restricted areas.
   Magnetic bit retention allows easy interchangeability of bits
   Heat-treated steel gives the wrench higher torque capabilities. (Exceeds all applicable standards)

Bits included:
7-Pc. Hex Bit Set (Sizes 3, 4, 5, 6, 8, 10 and 12mm)
7-Pc. TORX? Bit Set (Sizes T15, T20, T25, T27, T30, T40 and T45)
5-Pc. Triple Square Bit Set (Sizes 5, 6, 8, 10 and 12mm)
Hyde 42049 Replacement Magazine for 42048 95 blades)
Hyde 42049 Replacement Magazine for 42048 95 blades)
Replacement magazine with 5 blades for use with HYDE #42048 auto-load utility knife. 8 sharp points per blade.
Armstrong 10-406 1/4 Inch Drive 4 Point Standard Length Socket, 3/16''
Armstrong 10-406 Socket 1/4" Drive 4PT 3/16
1/4 Inch Drive 4 Point Standard Length Socket, 3/16'', Product Number: 10-406, Opening Inches: 3/16, Drive End: 0.446, Wrench End: 0.382, Overall Length: 0.876, Bolt Clearance: 0.200, Wrench Depth: 0.200, Length to Shoulder: 0.436
Armstrong 27-768 4 Pc Extra Thin Tappet Wrench Set
Armstrong 27-768 SET Wrench TAPPET 4PC
Set 27-768 4 Pc Extra Thin Tappet Wrench Set, Product Number:27-768
Allen 56187 9Pc Metric Ball Plus Screw Driver Handle Hex Key Set
Allen 56187 9Pc Metric Ball Plus Screw Driver Handle Hex Key Set
Material - Alloy Steel
Measuring System - Metric
Set Included Storage - Storage Pouch
Key Sizes - 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
Finish - Black Oxide
Ball End provides up to 25 degrees of access while remaining secured in fastener
All Hex Keys are precision formed to exact tolerances for precise fit.
Resists rotational distortion.
Allen 56188 8Pc Metric Long Arm Ball Plus Screw Driver Handle Hex Key Set
Allen 56188 8Pc Metric Long Arm Ball Plus Screw Driver Handle Hex Key Set
Material - Alloy Steel
Measuring System - Metric
Set Included Storage - Storage Pouch
Key Sizes - 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
Finish - Black Oxide
Ball End provides up to 25 degrees of access while remaining secured in fastener
All Hex Keys are precision formed to exact tolerances for precise fit.
Resists rotational distortion.